Method for Benzene in Air on 6890N

Question

I'm looking for a method that would allow me to run benzene in air 1.5ppm and 10ppm standards. I'm using a 6890N GC with a PLOT Q + PT 30m x 0.53 ID x 40um film column. I am manually injecting benzene using a clear B-D 60ml plastic syringe. Any help would be much appreciated. Thanks

ssichani · Accepted Answer

Hi Cfin!

I looked up on our Agilent Application Finder, Application Finder | Agilent and found this method relevant to what you are asking about: https://www.agilent.com/cs/library/flyers/public/5991-1613EN.pdf - I really hope this helps. Don't hesitate to write back, if further help is needed. Thanks!