How to combine multiple calibration curves into a single processing method in Openlab CDS?

Question

I am seeking tips on how to create combine multiple calibration curves into a single processing method in Openlab CDS. Specifically, if I already have a multi-compound method, how do I add additional calibration curves to the master method? I created a processing method that contains all of the compounds of interest, but I ran the calibrations in different sequences. How do I get all calibration curves into the one master method?

Andy Wright · Answer

Hi joseph.mcauliffe 
 You could combine the result sets containing each calibration curve into a single result set and reprocess with your multi-analyte processing method. 
 In OpenLab CDS, open all of the result sets, right click on each of the result set names and Add to new result set; a + will appear to the right of each injection. There's a button on the processing tab of the ribbon that can create a new result set from all of the selected injections. You may need to have a look at the Sample type of each of the injections in the new result set with all of the injections. Reprocess, update master method and you will have a multi-component calibrated method! 
 /Andy