OpenLab 2.3 - get baseline values

Question

Is there a way to get the y value of the baseline at a given time? I want to get the value of the baseline at the start and end of each peak. I was able to access this in ChemStation but unsure if possible in OpenLab.

martin.adams · Accepted Answer

Hello, 
 
 You cannot get a baseline value at a specific time point but should be able to see it for peak start and end. In IR it is Peak_BaselineEnd and Peak_BaselineStart. 
 
 Marty Adams

OpenLab 2.3 - get baseline values

Top Replies