Our current total chrome software calculates the weight of the compound using following formula .
Wt of component = (areacounts/total areacounts )*(1/(1/RF)) where RF is response factor. This weight is then normalized to obtain normalized wt% by using formula (calcwt/total wt )*100
The wt% thus obtained is corrected for air interference using following formula: N2-4(O2)= corrected N2.
The data is then re normalized to 100% = This is corrected wt%
Corrected Wt % is used to calculate moles using molecular wt of the components. calculated moles= corrected wt%/MW
These calculated moles are used to calculate mol%= (calcmol/total mol) *100
Our current final report contains component Id , wt%, Corrected wt % & mol % . I am looking to generate a similar report
