Traps

Hi Community, what is the maximum operating temperature hydrocarbon/moisture trap (HMT200-2) and m oisture trap (MT200-2)? Thanks
Septum purge negative flow

I am operating a 7890/5975 with a Tekmar Atomx XYZ interfaced to the front inlet. The septum purge actual flow reads -11 ml/m when the setpoint is off and about -1 psi when the setpoint is 3.0 ml/m. The...
MT400-2 Moisture trap

Hi community, please help me, I can use ferrule part number 5180-4109 with this trap MT400-2 or not. Please, recommend me ferrule for the Moisture trap.
Can I increase septum purge flow instead of split flow without diluting sample?

Hello, I am having issues with GC-MS using S/SL inlet connect to headspace unit. In order to maintain a minimum total flow of 20mL/min, I need to maintain a minimum split ratio of 11:1. In order to detect...
How to simulate an "Inlet Trap Test" check remotely using only Masshunter/chemstation method changes??

Good Morning, I know that there is a way to simulate the diagnostic tests that are normally seen on a GC. What I want to do is create a method that simulates those conditions so remotely, I can log onto...