When printing the Batch Review Report the numbers are displayed in scientific Format e.g. 3.784e-2 instead of 0.03784 - what I want to have. Does anybody know where I can Change the Output Format for the Batch Review Report?
I am not aware of a way to change the number format on a batch report in OpenLab ChemStation. If you need to have that level of control over your report output then I would recommend that you switch to using Sequence Summary reporting with an Intelligent Report template.
Thank you for the information. I had feared that and already started with the Sequence Summary Reporting. However whatever template I am using there is always the sample name missing (not filled with Information)? All the other Information are filled with my data like method, Instrument or amount...
Do you have any idea what might be wrong?
As long as the Sample Name column in your sequence table is being populated then that information should populate any table column using the expression =Sample_Name. What expression are you using for your sample name column in your results table?
Of course, the Sample Name column in my sequence is being populated.
When using Batch report during Data analysis it is working (see figs.)
However as soon as I am using ANY Report Template the field Sample Name is empty, although all the other Information are displayed. The same is true if am generating a csv-file from Reporting. However when using Output Batch Report in all file-types the Sample Name is being populated.
At first try I used the available report templates without changing anything. Later I generated my own report template - of course using the Expression Sample_Name. But whatever I try - no success.
I have no idea what is wrong. What I don't understand is, that in Batch Report the information for Sample Name is being populated but in reporting not - suggesting the system is at least capable of processing the information.
Thank you for your help!
Would you mind opening the sequence table for this result set in Data Analysis and posting a screenshot of it?
This is the original Sequence Table in Method and Run Control
Sequence Table in Data Analysis
Thank you. Sample Name is definitely populated in both your acquisition and data analysis sequence table, so I don't have an explanation for you on why a column with a value expression of =Sample_Name is not reporting those values.
I recommend you contact your local Agilent support to see if they can identify the problem: https://www.agilent.com/en-us/contact-us/page
Retrieving data ...