How can I remove a liner which sticks in the inlet? I already removed the O ring, but the glass part still sticks.
Hi James! thank you for your suggestion. The tweezers did not help, since it easily breaks the liner.
But I actually solved the problem by heat the inlet again several times and then I could use the tweezers
If this is a split/splitless inlet, the liner should just pull out, you may need tweezers in some cases. I havent seen a liner stuck beyond that. I guess in a worst case scenario for the s/sl inlet, you could remove the column, insulation cup and gold seal and push it into the oven. If this is an MMI(Multi-Mode Inlet) the last is not an option.
Retrieving data ...