AnsweredAssumed Answered

intermittent electronic noise on a 5975C MSD

Question asked by stevenh12stevenh12 on Jul 24, 2020
Latest reply on Aug 6, 2020 by stevenh12stevenh12

When I do a full scan in manual tune I get a bunch of  electronic noise starting around mass 500.   I know it has something to do with the analyzer.  I cleaned the source and was able to swap the analyzer with another 5975 and the noise was about the same on the 2nd mass spec.  The voltage on the multiplier is ok.  

 

I tried a new feed thru part and a new red high voltage power cable.  I also tried some different source parts. 

Outcomes