I have a new 1290 multisampler G7167b which was installed in January. I am just now having problems maintaining the cooler temperature. I have it set to 4 degrees C but it keeps generating too much condensation. I have to keep clearing the lines. I'm sure this is due to the warmer temperatures we are experiencing. Is there a recommended temperature to maintain our cooler so that not as much condensate will be generated? Ideally I would like to maintain a refrigerated temperature however I don't want to be clearing the lines each time. This last time, I had to wick away the moisture from the autosampler itself in order for the cooler to start coming down in temperature.