I have a problem with integration in Agilent ChemStation. I cant find in which method it is open. Due to open integration, I cant use other functions. How to find a place where integration is open?
If this is only affecting your offline sessions then it might be a corrupt conf_old.reg file. Try renaming your conf_old.reg file to conf_old.reg.old. You can find this file in C:\Chem32\1\
I am not sure I am understanding your question. Are you unable to switch to the other tasks like Calibration or Signal? If so, do you see an error/warning message when you try?
If you are actively editing the Integration Events of a method you will need to exit the integration events interface before you can switch to another Data Analysis task. You can either save any changes you made by selecting the green check button or leave without committing changes by clicking on the door button:
But I have not such window as you showed
If you load another method do you have the same issue? Do you have multiple instruments configured on this workstation and, if so, do you see this problem on all of the instruments or just one instrument? Does this occur in both online and offline sessions?
It issue is on the another method too. I have such problem only in offline sessions, online sessions work correctly as usual.
Yes, it’s works! Thank your!
No error is issued. The integration sign lights up in orange and there is no way to switch it.
Retrieving data ...