I have to show the average noise from 3 blank injections. The Results of summary calculations are a bit out of my expectations Min & Max are ok, but the others…. What could be the problem? (OpenLab 2.4)
I updated that tags on this post to increase visibility.
I would be interested in seeing the filtering properties as well as the peaks and repeating properties of the table. I would also want to look at the column's value expression to see exactly how these numbers are being pulled into your table.
Add the count to that summary to see how many values you are actually dealing with, as depending on how you are calculating noise, and how that table is filtered you may have more than the 3 values shown in the table.
I marked this post as assumed answered due to its age. Feel free to update us with what you found or post again if this is still an issue.
Retrieving data ...