Please could you confirm if it possible to have a FID and a MSD detector both installed on the 7890B GC - 1 as the front detector and 1 as the back detector?
I just checked the order guide, and you can have a GCMSD plus one other signal without purchasing anything additional. MSD has to be a 5975 or newer. The GC has to be 6890N or newer.
The hardware is capable of GCMSD with FID . Software you would need MassHunter installed if you are not already using MassHunter.
Thanks for your reply. Can the GCMSD with FID run with Openlab 2.3?
Thanks for the info. Please can you clarify if it is possible to add a MSD to an existing GC-FID and operate with Openlab 2.3 software?
From reply above , yes, for further detailed information I would suggest contacting your local sales representative.
Thanks and Best Regards
Retrieving data ...