During analysis the error "You have shutdown conditions! Oven: Temperature warming up very slowly " How do I solve it? Can you help me? Thankful.
It could be the flapper motor is not closing the flapper all the way. Try setting the oven lower and higher and watch if they are fully closing when heating up. If not you need a new motor.
please share the system model number .
its 7890 GC System or any other model .
please reset the GC System .
(for reset) press and hold the clear button and switch off and switch on until the GC get on properly .
than check if same problem .Please check the flapper its working fine or not .if not please replace the flapper motor
and if the flapper is working fine .
than replace the
Oven heater shroud
you can also cross check with refresh the GC firmware . and update the current firmware .
please share the status of system .
I will mark this post as assumed answered due to age. If you have an update, please feel free to post again.
Retrieving data ...