Any option in masshunter 10.0,to Auto off the LC PUMP by using time limit as auto on with date and time schedule.
Masshun have option auto on the LC pump with selection of desired date and time.
There is no option for this built into MassHunter Acquisition, though one way to keep the system running for a set time after the last sample would be to add a no injection isocratic method at the end of your worklist. Set the run time to be how long you want the instrument to remain idle before shutdown and set the worklist to run the PumpsAllOff script when it is complete. If someone needs to run the system before that run is over they can simply stop the worklist. Otherwise the system will shutdown if it is idle.
There is a WAIT script command you could use instead of the method, though that would only wait for a maximum of 30 minutes. Using a method gives you a little more flexibility.
The only other option would be if you are using MassHunter Walkup, then you can set an instrument idle method load, stand by, or lamp off timeout for the system. The instrument idle method could have pumps off but leave other detectors on until the timeout for standby is reached.
Retrieving data ...