Is it possible (with some magic) to show the initial (or the average of a short period) pressure of an injection on the report? I'm using OL2.4
There is also another possibility;
There is a field in "Fields->Injection->Diagnostic Data. If you drag this on the report a dialog will pop up showing teh diagnostic values for your LC instrument config:
From there also a value like Start pressure and End Pressure should be available.
I have added tags to this post to increase visibility.
What type of instrument are you using (LC or GC) and what is the model number of the relevant module? We will need to know what pressure you wish to appear on the report (pump pressure, inlet pressure, etc...) before we start to look into this for you.
Sorry for the delay I want to show the HPLC's pump pressure, but there is nothing about it in the report/CC editor.
You can display the instrument trace for the pump pressure on your report. To find the signal name of the instrument trace you can expand the Instrument Traces section of the injection tree and locate the pump pressure:
Then on your report you can add a chromatogram snippet and edit the properties to display the instrument trace like below:
Hopefully this helps.
Retrieving data ...