I am confused... You need it for Chemstation or Open Labs ?
Sorry, he didn't really specify what he was using. I showed the OpenLab C.01.07 Chemstation edition.
If he is new to OpenLab he probably is using 2.X and that would be different. I don't have any 2.X installs so someone else will need to help him.
Sorry about the confusion.
If you want to do it in Open Labs then u first need to start Data Analysis from the Control Panel.
This opens the appropriate project with it.
Then u select " Data Processing" ( bottom left )
Then select "Processing Method "
I would start to select Calibration. Then choose EXSTD or ISTD
then select Identification.
Add the compounds to your Identification Table.
Go back to Compound Table. Insert the values of your Std.
If you got all " Reprocess all Data"
Then the final step would be to select a report. ISTD or ESTD.
Hope this helps
Thank you for the responses. We did it by selecting the whole chromatogram as a timed group and selecting "quantify each peak individually".
I marked this assumed answered or resolved in this case . If there are still issues, please post again.