If the error is: The System isn’t setup properly for GLP mode
The problem is usually caused by the Agilent Security Service not running correctly. Agilent Security Service starts when the computer boots. It is configured to log on as the user ChemStation Admin. Sometimes when the Security Pack is installed, and the user ChemStationAdmin is created, the setting “Password never expires” is not checked. If ChemStation Admin’s password expires, the Agilent Security Service will not start, and we get the GLP message. When you get “The System isn’t setup properly for GLP mode!”, go to Start, Settings, Control Panel and select Administrative Tools and open Services. Double Click on Agilent Security Service and see if the status is “Started”. If not, try clicking on the Start button. If it won’t start,log on as Administrator, and reset the password for the user ChemStation Admin. In the Agilent Security Service Log On tab, enter the new password for ChemStationAdmin.
Once that is resolved, follow the Security Pack User Guide located on the ChemStation disk to set up Operators and Managers (The manual is located in the Security pack directory in the Manuals directory.