13 Replies Latest reply on Mar 8, 2018 11:23 PM by roy_milouot

    Quad heating up

    roy_milouot

      Hi

       

      Noticed suddenly the Quad temerature increased to about 190 (even though the method is set to 150) in my Agilent 5973 (GC)MS.

       

      I shut the MS off for about 20 min. back on again and it's on 170c and slowly dropped to 150 as it should be.

       

      Running sequence again now, hopping it's a glich or something but thought I should ask.. any reason for that to happen? I hope the motherboard is ok.

       

      Thanks!

       

      Roy