Yes, you do need a separate clamp (larger size) to join the inert spray chamber to the inert torch on the MP-AES. This clamp is illustrated below - this is available as Agilent pn G8010-60227.
This is normally supplied as standard with the inert torch (or the inert sample introduction kit). I'm sorry to say but it appears this was not shipped with the torch you received. Apologies for the inconvenience. We are investigating to determine why this was missed. I understand that a replacement has already been organized and is being shipped to you.
Hope this resolves your concern,
I forgot to address your question about installation of the OneNeb. There are instructions and a video illustrating installation of the nebulizer in the MP Expert Help. Look in the "Getting Started - Preparing the Instrument for Use" section.
Hope that helps you,
De : evanclay
Envoyé : 4 octobre 2017 19:43
À : Vicky Dodier <Vicky.Dodier@gmn.ulaval.ca>
Objet : Re: - Re: MP-AES 4100 upgraded to 4200
Agilent Community <https://community.agilent.com/?et=watches.email.thread>
Re: MP-AES 4100 upgraded to 4200
reply from evanclay<https://community.agilent.com/people/evanclay?et=watches.email.thread> in Consumables - View the full discussion<https://community.agilent.com/message/2472-re-mp-aes-4100-upgraded-to-4200?et=watches.email.thread#comment-2472>