MS 40 Pump Oil Leakage issue

Question

Hello Team. I am facing issue in MS 40 Pump connected with ICPMS, Oil Leak after 2 -3 months & it is happing for almost all system. i replaced the Pump two time & same issue reported. 
 any suggestions & can we do some PM Or Seal replacement in Feild to avoid such leakage.

dahulett · Accepted Answer

For your MS40+ Oil Leak:

The most likely seals to leak and what is the leak-checking protocol? 
 
 The most likely gaskets to leak are the external gaskets/seals:

Items 17, 35, 37, 38 or 39 
 These are included in the MS40+ Maintenance Kit &ndash; 9499203
 
 A good way to find a leak is to clean the pump outer surface with IPA and place dry rags under the pump 
 Oil will show up at the point of leak, or on the rags below that leak point

MS 40 Pump Oil Leakage issue

Top Replies