Hi!

I want to filter my components based on the noise range given in the ProcMethod, but there is no expression for it. Only way to display it  with a 'Single Data Analysis Method Parameter' field, but it can't be be used as a variable  (DefaultChain…

The reporting on our MassHunter Quantitative Analysis software (10.0, Build 10.0.707.0) is no longer working. We haven't changed anything on the software. The reporting stops before even creating the report.xml file and is issuing an error message (Error…

Hello,

I would like my sequence data to imported  to LIIMS. I have OL CDS 2.5. I need help creating a report template that will summarize the samples names and the 9 components amount into 1 single page.

Thank you for your help.

I am trying to create a single sample report that also shows my calibration curve, however if the sample is negative the calibration curve won’t show. How do I get the calibration curve to show for every sample?

scale

Hello,
We need that in the intelligent report the chromatograms appear in scales according to the type of injection.


For example, in the limit solution we need to see the peak of the entire standard (see image) and in the samples we need to expand…

I am working on OpenLab CDS 2.5 and have spent the whole day trying to either use the Custom Calculation Editor or to achieve my result using Report Templates but I have not been successful with either! 

I have given up on doing this with the Custom Calculation…

Using MassHunter 10.2 and Report Builder 10.2.

Is there any way to report mean/stdev of a column?

Using MassHunter 10.2 and ReportBuilder 10.2

I am working on a report template for a standard additions method. The report will have quantitative results at the top for all samples (RT, Response, Conc, Final Conc), then Calibration Curve Graphic, then…

Hello community!

I have 3 Groups of compounds with 2 components in each. My goal is calculate sum of Peak Area % of component in each groups in this table.

Area Sum and Concentration are both counts perfectly, but not a Peak Area % Sum for groups.

I…

Using Report Builder 10.2 for MassHunter. I would like to show the data/time that a batch was submitted for acquisition at the top of a report, but Batch-AnalysisTimeStamp shows the time that the batch was processed for DA. I see no other time stamp options…

I am creating a monstrous all in one report in OpenLAB CDS 2.5 that can calculate USP <905> Content Uniformity Acceptance Values, Assay Values, Impurity Values calculated multiple different ways, and Retention Time ID.  I would like to try and keep…

I am working on calculating USP <905> Content Uniformity within a report and I would like some feedback.  Our current practice has the calculation either performed by hand, or entered into a validated spreadsheet.  I have come up with the following…

Using MassHunter PDF Report Builder 10.2.

I was working on a custom report template, and now the vial position does not display for ANY pdf report template including the pre-packaged templates. What may have happened?

One a side note, may I request a…

Dear community,

I´ve got an issue with a sample report for a GC system. The system is measuring gaseous hydrocarbon samples with wide compound ranges (C1-C8+) most of these compounds are quantified on their own but in the higher boiling ranges we are…

Hi,

I'm trying to get the MS base peak m/z into the result table in openlabs intelligent reporting (version 3.4.0). 

I've already deleted the filter in "Filtering" but still see no mass in the table. Am I missing something to make it work, to let the…

Compound A elutes in each chromatogram and i want to report the peak areas in each chromatogram that are greater than the peak area of Compound A in each chromatogram. As the area of Compound A varies in each chromatogram i can't use the area reject in…

How do I report "Estimated Conc." using either module unknowns, qual, or quant?  I know I can generate it MSD Data Analysis (Chemstation VF-1) but I want to print the unknowns report which includes the estimated concentration. When I edit columns…

Hello,

I have create the Peak Area of one compound as a new value and save expression as "MethylP" then I add the new column as edit formula as "Peak Area/MythylP".

So once I have done the expression creation the Summary Calculation…