Hello,
I recently moved a G1888 connected to a 6890 controlled by OpenLab chemstation C.01.07 SR3 to a different GC and computer. Now it's connected to a 6890N controlled by OpenLab C.01.10 U3. When I try and configure the G1888 in the OpenLab control panel it crashes. From the Agilent documentation for OpenLab C.01.10 chemstation the G1888 is supported. I'm currently using driver B.01.07.2 for the G1888. If anyone knows what the problem might be I'd appreciate it.
Thanks
Tim