data analysis openlab cds 2.5

Is it possible to use the calibration table of a processing method created in resultset1 for processing data from resultset2 without doing an update master method?
Thank you for your help
syb

Parents
  • Merci pour votre réponse, mais le profil technicien ne peut pas faire le travail.
    .
    Autre question : A la fin d'un rapport de séquence, est-il possible d'ajouter les paramètres d'intégration, la table d’étalonnage, la table d'identification et le nom des fichiers avec leur chemin utilisé pour la table d’étalonnage sans avoir la méthode complète ?
    Est-il possible d'avoir le contenu de « Data Analysis Method Compact » sans la audit?
    Est-il possible d'avoir la « Référence d'injection » sans passer par la présentation «Table d’étalonnage» ?
    Merci de votre aide

Reply
  • Merci pour votre réponse, mais le profil technicien ne peut pas faire le travail.
    .
    Autre question : A la fin d'un rapport de séquence, est-il possible d'ajouter les paramètres d'intégration, la table d’étalonnage, la table d'identification et le nom des fichiers avec leur chemin utilisé pour la table d’étalonnage sans avoir la méthode complète ?
    Est-il possible d'avoir le contenu de « Data Analysis Method Compact » sans la audit?
    Est-il possible d'avoir la « Référence d'injection » sans passer par la présentation «Table d’étalonnage» ?
    Merci de votre aide

Children
  • Hi .  Forum posts should be written in English, however you can use the translation tool in the upper-right corner of the web browser window to view content in local language.

    Translation of the post is below.

    Thank you for your reply, but the technician profile cannot do the job.

    Another question: At the end of a sequence report, is it possible to add the integration parameters, the calibration table, the identification table and the names of the files with their path used for the calibration table without having the complete method?
    Is it possible to have the contents of "Data Analysis Method Compact" without the audit?
    Is it possible to have the "Injection Reference" without going through the "Calibration Table" presentation?
    Thank you for your help

Was this helpful?