Different calibration level range for 1 compound in a 3 compound calibration

Hi chemlab1989

I would set the number of levels to 6 in the Compounds > Calibration (General) part of the processing method then set the values for the levels for the first compound in the Level 1 to Level 6 part of the Compounds > Calibration table of the method, and set the values for the other compound in Level 1 to 3 (or 3 to 6 if you prefer) in the same table.

I would expect that to work fine.

/Andy

Hi Andy

Thank you.  Of course, it was something simple :) .  Your suggestion looks like it did what I wanted.

Only simple when you know the answer

Only simple when you know the answer