Hello,
We have >10 LCs in our lab, many of which are "unique" in that they have different detectors, autosamplers, some with chillers, etc. Because of this, we have a unique shutdown method for each instrument that we add to the end of each run que. We ran into an issue a couple of times where the wrong instrument shutdown method chosen, which kicks an error (not sure the exact error, something about instrument configurations not being correct). When it does this, the system essentially ignores the shutdown method and continues to pump.
Is there a universal setting where you can tell the instrument to shutdown when faced with a method/instrument configuration conflict instead of ignoring the error?
Thanks!
