We want to control Waters i-class LC with Masshunter B.07.00. Does anybody can advice, if this is possible?
MassHunter acquisition does not offer 3rd party LC driver support. We also don't test 3rd party instrument control software for co-residence compatibility with MassHunter. One solution would be to have one PC controlling the LC and one for the MS. Then you would need a remote cable between the two instruments so that a run on the LC will start acquisition on the MS. Unless anyone else has done this in the community and could chime in I would suggest contacting your local Waters and Agilent support teams for assistance in getting this set up, since this will probably require more in depth help than is possible on the Community.