Sometimes it can be difficult to find the part number for a particular part. Here is a table of parts and their part numbers for GC/MS instruments.
Let's build it up to make it useful for everyone. If you would like to add parts information, please click "Edit" at the right, add your entry, and then click "Publish". Moderators will need to approve it before it goes public. NOTE: this information is not necessarily validated by Agilent engineers, but is provided to the community in the spirit of cooperation.
Drain plug O-ring for Agilent DS42 rough pump. 0905-1515
| Relevant instrument(s) | Part Number | Part description | Part image |
|---|---|---|---|
| 5975 | 0905-1463 | high vac gauge tube O-ring | |
| G3870-80061 | When updating from the new duo mist filter to the older recomended blue filter there is an oil return line that must be capped off. Order G3870-80061 or substitute a uECD/TCD detector plug 5060-9055. | ||
5977A | SR03701824 | ||
| 5975/5977A/5977B | 0905-1619 | Drain plug O-ring For Pfeiffer pumps on Single Quad systems | |
| 5973 | Drain plug O-ring. | ||
| 5975 | G1099-20027 | HV Feedthrough Nut 3/8x32 ultem Black (HED Feed Through Nut) | |
| 5973 | G1099-20027 | HV Feedthrough Nut 3/8x32 ultem Black (HED Feed Through Nut) | |
| 5975, 7000 | G3170-65404 | The CI source for a G7000 is the same as a 5975. | |
| 5973 | 05971-80103 | Electron Multiplier Replacement Horn. | |
| 5973 | G1099-80012 | High Volt Feedthrough | |
| 6890 | G1530-60790 | MSD Transfer Line Extension Cable. The part number for the heater cable assembly, that connects the 6890 to the MSD Transfer line cable is G1530-60790.
| |
| 5181-3308 | Long No Hole Ferrule ( used for MSD), pk of 10 | ||
| 5190-4054 | Short No Hole Ferrule ( used for GC), pk of 10 | ||
| 5181-7458 | Short Ferrule, individual | ||
| G3452-60570 | Inert S/SL Shell Weldment (treated by Restek for Agilent, cannot be cleaned with gun brush) | ||
| G3452-60586 | Inert S/SL Insert Weldment (treated by Restek for Agilent, cannot be cleaned with gun brush) | ||
| 6890 | G1580-00070 | Valve Driver Bracket | |
| 6890 | 1390-1023 | Capture screws M4x12mm, Torx T20 | |
| 6890 | G1530-60660 | Valve Driver wiring harness | |
| 6890 | G1530-60790 | MSD cable, heated zone | |
