I've got a 5973 MSD where the Quad temperature is exceeding the set point of 150 at about 180 degrees. We replaced the ceramic source board and the Quad heater/sensor assembly, which did not resolve the issue. What else could we try?
Find maintenance, best practice, and troubleshooting articles.
I've got a 5973 MSD where the Quad temperature is exceeding the set point of 150 at about 180 degrees. We replaced the ceramic source board and the Quad heater/sensor assembly, which did not resolve the issue. What else could we try?
Hi Steve,
I assume you are loading the tune file you are always using. Assuming that the only other part would be the Main board.
Hi Steve,
I assume you are loading the tune file you are always using. Assuming that the only other part would be the Main board.