Software for Agilent 6410B MS

Hello,

 

We just acquired our First MS for our 1200 HPLC.   

 

It is the Agilent 6410B.

 

Can we use Chemstation for the MS or do we have to buy the MassHunter Software?

 

Any help or direction or suggestions or advice would be greatly appreciate.........

 

We are a small lab so we are trying to figure this out.

 

Thank You in advance for your help.

Parents
  • No Problem. The only revs that are not compatible is B.07 and rev10 Acquisition.

  • Questions for you ......since you are very knowledgeable ........ and before I make a purchase.

     

    Does this Masshunter Workstation software B.09.00 come with all of the software that is needed for the 6410B Mass Spec?

     -   Acquistion 

    -   Qual

    -   Quant?

     

    Also, if the Software Box is still Factory Sealed .... would you believe that the Software License  Numbers are in the box that I will need to use it like on the HPLC Chem station Software?

     

     

    Thank You so much for help.

  • The MassHunter Workstation Software MH SW Kit B.09.00 LC/TQ contains the following:

     

    · G3335-60189: 6400 Series LC/TQ Resource DVD

    · G3335-60191: MH Acq SW DVD B.09.00 Triple Quad LC/MS

    · G3335-90253: 6400 Series LC/TQ Quick Start Guide

    · G3336-60105: MH Quant B.09.00 SW 32GB USB Flash Drive

    · G3336-60108: MH LCMS Supp. SW CD B.09.00

    · G3336-60109: MassHunter Offline Utilities B.09.00 CD

    · G3336-60116: MassHunter Analysis Resource DVD DEC2017

    · G3336-60117: MassHunter Qual DA SW UFD B.08.00 SP1

    · G3336-60138: MH PCDL Manager SW CD B.08.00 SP1 Update

    · G3337-60251: LCQQQ MH Workst Auth Code

    · G6845-60008: MassHunter Reporting Training Disk

    · G6845-60088: MassHunter GCMS Supp CD B.07.06


    A new, unsealed "blue box" purchased directly from Agilent will have the entitlement codes in the box necessary to be sure your software is properly licensed.

     

    Chemstation is sold and licensed independently of MassHunter, so the box will not contain any Chemstation licenses, nor do the Chemstation licenses work for MassHunter and vice versa.  Your Agilent LC can be fully controlled by MassHunter, though it may be necessary to update the firmware.

     

    Hope this helps!

  • Thank You.

     

    You did a great job answering my questions.

     

    Have a super day.

Reply Children
No Data
Was this helpful?