Cary 50 cell changer issue

The cell changer is not mobile anymore, I would like to uninstall and install a single cuvette holder. Anyone know how to uninstall?

Parents
  • Hi,

    Thank you for reaching out. Uninstalling the Cary 50 multicell accessory is the reverse of the installation as described in the Cary WinUV help. There is a cable connected to the wall of the sample compartment that must be removed. There is then a screw securing the bottom plat of the accessory that can be found by sliding the cell block forward. Losen the screw and the accessory should be able to be removed. 

    Best Regards,

    Andrew Coukouma

Reply
  • Hi,

    Thank you for reaching out. Uninstalling the Cary 50 multicell accessory is the reverse of the installation as described in the Cary WinUV help. There is a cable connected to the wall of the sample compartment that must be removed. There is then a screw securing the bottom plat of the accessory that can be found by sliding the cell block forward. Losen the screw and the accessory should be able to be removed. 

    Best Regards,

    Andrew Coukouma

Children
No Data
Was this helpful?