After removing the central screw, turning the compartment counter clockwise should allow you to lift it out of the instrument.
this does not happen. it turns but it does not move vertically.
After removing the central screw, turning the compartment counter clockwise should allow you to lift it out of the instrument.
this does not happen. it turns but it does not move vertically.
Hello Filippas:
I have replaced the vis lamp based on these instructions. It required quite a bit of effort. At this point you should contact your Agilent office for repair options.
Best Regards,
Mike.
Hello Filippas:
I have replaced the vis lamp based on these instructions. It required quite a bit of effort. At this point you should contact your Agilent office for repair options.
Best Regards,
Mike.