Fiber Coupling a CARY 5000

Hello,

Im interested in Fiber Coupling into a CARY 5000. My thought process is to use the detector of the CARY 5000 for experiments. How I have it setup is that a light source is coupled into a fiber optic which travels inside the CARY sample bay and attaches to a collimator that is in front of the first detector window.

So far using an LED ive seen that the CARY can pickup the signal of the light but not reliably. So my main question is can it be done properly and if so what settings/ steps should i follow to make sure it works correctly.

Thanks,

CW

(Basically I 3d printed a collimator mount that sits inside a salt cell holder which is then placed onto the salt cell holder the CARY 5000 comes with.)

Was this helpful?