Cary 630. I recently replaced the filament, all worked well. Energy level is good. Operation stays stuck on “cleaning crystal”, can you help.
Cary 630. I recently replaced the filament, all worked well. Energy level is good. Operation stays stuck on “cleaning crystal”, can you help.
Hi...
Pls go to Advanced Features -- Diagnostics -- Click on "Reset Clean check or Validity". Clean Crystal Area Using IPA Solvent & Tissue Paper with Soft Hands.
Hope this will Resolve your problem.
Hi Arjun,
Thanks for the suggestion, I had tried this and I tried it again but no change. Still stuck on "cleaning crystal.
Hi Arjun,
Thanks for the suggestion, I had tried this and I tried it again but no change. Still stuck on "cleaning crystal.
Hi..
Then i request you kindly connect with Agents in local Agilent Contact Center they will further guide you.