Molecular Spectroscopy

Forum Agilent 82357B

Agilent 82357B

mihai.c over 2 years ago

Hi!

I am trying to replace the GPIB cable (and the PCI card) with a Agilent 82357B USB/GPIB converter and I am getting the error message "UV-vis 8453 powerfail”. The computer is running on Win7 32, Chemstation B.04.02 and IO libraries 16.

What could cause this issue?

Thank you,

M.

Top Replies

mihai.c over 2 years ago in reply to mihai.c +1 verified

Now is working fine. Thank you for your help.

Parents

0 Mike Picollelli over 2 years ago

Hello:

A common mistake is not setting the VISA interface ID to GPIBO, the GPIB address to 30, and the SICL Interface ID to hp82341. Please see the instructions starting on page 102 of the the Installation manual on the B.04.02 disk.

The latest tested IO library version is 16.3.17218. Later versions do not work.

Is it an Agilent branded card? I am not sure if the Keysight branded card will work.

Best regards,

Mike
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 mihai.c over 2 years ago in reply to Mike Picollelli

I have an Agilent brand converter and the IO library is 16.1.14931.

In the Connection expert the GPIB interface is green when address is set at 21 and red for 30. It is normal?

M.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
+1 mihai.c over 2 years ago in reply to mihai.c

Now is working fine. Thank you for your help.
Cancel
Vote Up +1 Vote Down

Sign in to reply

Reject Answer

Cancel

Reply

+1 mihai.c over 2 years ago in reply to mihai.c

Now is working fine. Thank you for your help.
Cancel
Vote Up +1 Vote Down

Sign in to reply

Reject Answer

Cancel

Children

No Data

Was this helpful?