I've just changed out the vis and UV bulbs in our unit and now I get the Error Code: 9:93035SEQ:E903.
How do I fix this?
Note: Since May, we've been waiting on a service technician and keep getting pushed out with no explanation.
I've just changed out the vis and UV bulbs in our unit and now I get the Error Code: 9:93035SEQ:E903.
How do I fix this?
Note: Since May, we've been waiting on a service technician and keep getting pushed out with no explanation.
After replacing lamp, it's litting or not.
If not,Check power cable and power supply also see movement of turret is okay or not...
It is lighting. I finally fixed it by removing the bulb turret and reseating it. I no longer get the error code, but I still get a lot of chatter from 800 - 870 nm.
May be some obstruction still there..check again..
Or may be some mechanical movement..
Or may be some mechanical movement..