Hello, I am GC/MS MH Quant. 10.1 software I need some assistance modifying a report so I can print out the results of my analysis. We use the result in ug/mL and multiply it by initial sample volume of either 0.500mL or 1mL depending on type of sample. We then multiply that by dilution factor and that varies as well and then divide the aforementioned by the sample weight. I am relatively new to this software and not sure how to add this calculation in or where as a custom calculation and then have the software print out a report. Thank you for your help and input. I am uncertain where to go in the software to add these unknowns so to speak. I see dil. , amt., and vol. which I could use.