Report Builder 10.1/10.2 compatibility

Hello,

There was a question previously posted detailing report templates for Qual were no longer accepted by report builder 10.2 (Why are my pdf Qual report templates no longer readable with report builder? ) 

The solution to being unable to edit was to uninstall report builder 10.2, and reinstall reinstall 10.1 and when needing to edit a quant template do the reverse to use version 10.2. 

Has there been any progress toward a solution to this issue?

Top Replies

  • Hi ,

     

    There is now a service release that addresses this issue. You need to log in to your SubscribeNet account and download the following.

     

    G3336-10001 Report Builder 10.1 SR1

     

    It is located in the MassHunter Common Software (GC/MS, LC/MS) section and may be in the Previous Version tab, depending on your entitlements. You should also be able to search and find the download.

     

    This will allow for Report Builder 10.1 and 10.2 (which will now be seen as 10.2.1) to co-reside. 

     

    Here are the two possible install scenarios

     

    Installation Instructions – “Clean System” with neither Qual nor Quant installed:

    1.)    Install Qual 10.0.

    2.)    Install Quant 10.1 and uncheck the Report Builder 10.2 option during the Quant installer.

    3.)    Install the service release – double-click “ReportBuilder.msi.”

    Installation Instructions – “Already Installed” where Qual 10 and Quant 10.1 are already installed:

    1.)    From the Windows Control Panel, Add/Remove Programs, uninstall Report Builder 10.2.

    2.)    Install the service release – double-click “ReportBuilder.msi.”

    3.)    From the Qual 10.0 installer media, under the “ReportBuilder” subdirectory, double-click “ReportBuilder.msi” to reinstall Report Builder 10.1.

    Once done, the Control Panel -> Add/Remove Programs list will indicate (at least) two versions of Report Builder are installed – version 10.1 and 10.2.1.

  • Hello,

     

    I have marked this question as Assumed Answered due to inactivity. Please let us know if you still need any help with this and we can pick it up from there.

  • Hi there,

    I ran into this problem with report builder but am not seeing the service release you refer to on subscribenet. I do have access to Quant 10.1 and Qual 10.0. can you help?

    Kevin

  • Hi ,

    Thanks for letting us know about this. was able to work with the Subcribenet team and the service release should now be available to anyone that is entitled to Quant. Please try accessing again and let us know if you are still having any issues.

  • Hi Howard, I am not seeing it on subscribenet. Yours  Kevin

  • ,

    Currently the search for that download is not working, but you can find it in the MassHunter Common Software (GC/MS, LC/MS) section on the Previous Version tab.

  • Thanks Howard. I was able to find it today. Much appreciated. Kevin

Was this helpful?