Hi all,
I'm using a 1260 LC/MSD and triggering fraction collection on selected masses. This appears to be working correctly, but I've started seeing an odd behavior with the collector. I'll enter a vial position for collection to start in, but at the…
This Information Applies To: Agilent Lab Advisor Software
Issue:
Lab Advisor is a useful tool for your LC instrument with tests, tools, and calibrations to support you in the daily operation, maintenance, and basic troubleshooting…
This Information Applies To: LC
Issue:
If the HPLC needs to be shutdown for a long time, this is a general procedure on what needs to be done.
Steps to follow:
This Information Applies To: Agilent Lab Advisor
Issue:
Lab Advisor Software provides state-of-the-art tests, tools, and calibrations to support you in the daily operation, maintenance, and basic troubleshooting tasks.
This article…
This Information Applies To: All Agilent HPLC modules (except hosted modules).
Issue:
If a module does not initialize correctly or it is not recognized by the software it is recommended to call our Remote Support Engineers to…
Hello everyone! We have just bought and installed a new LC 1260 Infinity II system with OpenLab cds 2.4. We always use a fraction collector, however the fraction collector doesn't show where the fraction collection occurred on a chromatogram. Perhaps…
Hello all,
Does anyone have a simple example of a LC-OpenLab command line instruction to load a specific method & sequence on a 1260 Fraction Collector?
More specifically, suppose I have just completed a fraction collection run using Method1.M and Sequence1…
Hello!
I have a question.
I have a preparative system of the following modules: G7115A - 1260 Diode Array Detector, 7158B –ALS/FC, G7161B –binary pump, and G9328A - 1260 Infinity II Column Organizer.This is a preparative line.
I want to add an analysis…
Applies to model G1364 Fraction Collectors.
To find the delay volume set on a fraction collector:
Here is some good info on taking care of your LC including shutdown to store your system and power up and general housekeeping, https://www.agilent.com/cs/library/usermanuals/public/BestPractice_en.pdf
Hi community!
Help me please, this G4204-81090 Low pressure mixer assembly for Agilent 1290 Infinity Quaternary Pump is a replacement G4204-60090?
I enclosing photo of the required part.
Hi community!
I need know HSA Peptide Standard Mix Kit composition (G2455-85001). On the Agilent web site in Safety Data SheetsI don't found information about composition.
Thanks!
A short question concerning the diverter valve of our preparative fraction collector. We exchanged the tubing to an analytical one because we needed lower delay volumes. That worked without problems but if we now want to collect for example 1mL we just…
Hi everyone
I am using a G1364A fraction collector with an HP1100 system running Open Lab Chemstation edition
I wanted to confirm that I have the correct delay volume set for the fraction collector but can't any way to run the delay volume calibration.…
Agilent 1200 Series Analytical Fraction Collectors_ Continues to FAIL initialization, also error code 3833 and error message needle too long, too short or missing. please Advise
