Hello, I am using Chemstation is Rev, C.01.08 [210]. I am running an external standard at 7 levels to generate an FLD and DAD curve. How can I get the report to choose the FLD signal? It is only choosing to show the DAD data, but I need both to appear. I am using the Calibration Curve template in the Report Editor, which selects the signal using "=Last(Signal_Name)." I tried selecting FLD by using "=First(Signal_Name)." but that only seems to work sometimes. I would appreciate help, thanks
Hi Andy, yes:
Hi Vanessa R.
What does your calibration table look like? When you created the calibration table, did you check the box shown in the screenshot below:
The report item you have modified is supposed to repeat for each compound in your method, so that would need to allow for different compounds from different signals at the same retention time.
I wonder if that is the cause of the problem you have?
/Andy
Hi Andy, yes we do check "Calculate Signals Separately," although it is only 1 compound that we are detecting. Below is a picture of the calibration table. Oddly, I was able to generate a report with both signals from the Sequence that ran the calibration standards, but not the sequence with the test samples. This is strange given that the Master Method is updated with the calibration table parameters from the Calibration Standards Sequence, so they are the same.
