PS 325 detector, "Method not ready" constantly

Hi

Check lamp is okay or not.

Last time when lamp calibration performed.

I have no way of accessing this info. Agilent Lab Advisor won't recognise the Varian instruments. And the 'Chemstation' that (or Openlab) we have doesn't have the "calibration" icon in the toolbar. Diect control brings up "calibrate lamps" but then doesn't do anything to the detector.

Lamp is litting or not..you can check it.

lamps do alight. i can turn them on and off. Just seems to be a disconnect somewhere that's stopping the detector going into 'run' at sample start.

When method stopping suddenly, that time lamp is litting or not..

Hello,

Due to the age of this forum post I am going to mark this as resolved.  If you are able, please reply back and share an update.

If you still have this issue, please share a picture of the error logs (especially any error code associated with the "Method not ready" message) and detector methods.