Problem with an ALS model G1329B.

Hello friends,

I have a problem with an ALS model G1329B. Once the module is powered on, it does not complete the initialization and shuts down, then it tries to initialize again but it does not.

The CAN cable was changed, but the fault persists.

In the logbook the message indicates: ¨There was no module G1329B found on connection. Controller Timeout-30. Device Timeout.-30 Connect Timeout -30.¨

What could be the cause of this failure? 

I attached a video to appreciate the failure. 

 

Parents Reply Children
No Data
Was this helpful?