connecting LC1100 stack modules

Hello!

The original computer to the LC1100 crashed and I am working on connecting the LC1100 to our replacement computer as a stand alone setup. 

 

I have made a connection to the DAD by setting the DIP switches 5 and 6 on the G1369A card to up but none of the other modules appear online. I read on one of the other post that I should perform a "cold start" on the modules to establish the connections between stack modules and DAD. 

 

All the firmware is up to date but, if there are any tips or actions recommended please let me know. 

Parents Reply Children
No Data
Was this helpful?