G1362A RID Diode Balance. -1 or 1

Hello, while trying to balance the diodes in our RID we discovered that no matter how small of an adjustment is made the signal will only vary from -1 to 1.  The detector has been purged for hours with water and mobile phases and appears to be free of any air bubbles.  My thoughts are that one of the light receiving diodes has become faulty thus making balance impossible.  Any help would be greatly appreciated.  

Parents Reply
  • Hello !

    have you solved your problem? Can you tell us what was the reason and how you solved it? The fact is that I have a similar situation. But I think I have a problem with the quartz cuvette. I believe that the people who worked on this detector exceeded the PH level of more than 9.5 and the cuvette deteriorated.

Children
Was this helpful?