How to record Unknowns Analysis Method File Name for data export?

I'm guessing that you want to include details of the Data Acquisition method ? ....or something else?

There are 285 available columns....  Four have the word "Method" in them.  Acq. Method Path, Acq. Method File, Method Version, and Method Path Name.  There are many other details like Tune File Name and Tune File Last Time Stamp, Sample Name, Sampling Date-Time, Vial, Vol....

Thanks Paul.

I wanted to record which UA Method was used i.e. the preset methods which we load for automated deconv., RTI and library matching, not the data acquisition metadata. 

I do not see any available columns called Method Version or Method Path Name (see below). Is that the file path where we save our preset UA methods?

I selected all the component columns, did an export, and the Method Path Name and Method Version were both empty anyway. I tried searching for the UA method name (a demo one called apple_drink2.uaf) and it's not there in the component table. 

I'll have to ask.... 

The expert said:

"The idea of a method file in both UA is sort of misleading as there is default method and once loaded a real method file can be edited on a per data file.  In fact I do not see the UA method file name anywhere in the UA data set.  I would say that as things stand now this cannot be done."

It was taken down as a suggested improvement, at least.

The expert said:

"The idea of a method file in both UA is sort of misleading as there is default method and once loaded a real method file can be edited on a per data file.  In fact I do not see the UA method file name anywhere in the UA data set.  I would say that as things stand now this cannot be done."

It was taken down as a suggested improvement, at least.