Aux EPC or PCM for Collision Gas 7890/7200

Question

Hi, we're trying to set up a used 7200 and everything is working but the 7890A we have doesn't have the dedicated CC EPC - is it possible to configure a standard Aux EPC or PCM in a 7890A to control collision cell flow? 
 Thanks

paulsalverda · Answer

No. There is a QTOF specific collision cell EPC module. The software needs to recognize it. 
 G3850-60039 | Agilent EPC module 
 G3470-60550 | Agilent , Fitting and 1/16" tubing to go from the EPC module to the QTOF CC 1/16" Swagelok connection. 
 Is the 7890 setup for the MS transferline heater/sensor connection? Has that GC ever been run with a mass spec? 
 Is it a 7200A or 7200B ? What's the serial number?

Aux EPC or PCM for Collision Gas 7890/7200

Top Replies