I am getting an error on my 8890/5977: Mass Spec: Network Unavailable. How can I clear this?

The 8890 model is G3542A and the 5977 model is G7077-64427. I have power cycled both instruments. The data system is MassHunter 10.1.49. The screen on the 8890 gives me the choice to check Use Bootp or Use GC Subnet. Neither one works. The screen also has a red note: The MS IP address does not fall within the valid IP range (, per the MS Net Mask and Gateway. The MS IP Address is, The MS Gateway is and the MS Net Mask is

Was this helpful?