hello, I have a 6890 plus equipment, a problem with the turbo pump. I get an error that the turbo pump says: turbo pump is going (or was going) very fast, consult the service manual. But I can't get any information about it. aid
Find maintenance, best practice, and troubleshooting articles.
hello, I have a 6890 plus equipment, a problem with the turbo pump. I get an error that the turbo pump says: turbo pump is going (or was going) very fast, consult the service manual. But I can't get any information about it. aid
Hi
It's very old model..I don't think that you can get support of this...
You can vent and restart again all system then check...
What is the model number of the Mass Spectrometer? Which turbo pump is currently installed in it? There are a few choices - - The 5973 could have come with a "Standard Turbo" or a "Performance Turbo" -- but the originals have probably been replaced over time so it could have a HiPace 80 or a HiPace 300 in it, too. Some pictures of the turbo and turbo controller may help.