MSD 5973 - Voltaje del Repeller demasiado bajo

I am operating a 5973 MSD.

The tune is setting a repeller voltage too low between 10 V and 13 V, observing a spectrum with approximately 180 peaks and an EM voltage of 1700.

The other parameters are normal.

What can be the cause?
Parents
  • Hi  

    Hello!  Thank you for your question.  Forum posts should be written in English, however you can use the translation to view content in local language.

    Translation of the post is below.

    I am operating a 5973 MSD. The tune is setting a repeller voltage too low between 10 V and 13 V, observing a spectrum with approximately 180 peaks and an EM voltage of 1700. The other parameters are normal. What can be the cause?

Reply
  • Hi  

    Hello!  Thank you for your question.  Forum posts should be written in English, however you can use the translation to view content in local language.

    Translation of the post is below.

    I am operating a 5973 MSD. The tune is setting a repeller voltage too low between 10 V and 13 V, observing a spectrum with approximately 180 peaks and an EM voltage of 1700. The other parameters are normal. What can be the cause?

Children
No Data
Was this helpful?