EI interface (transferline) for 7000D TQ

Thanks James.

Hi cocones,

I checked with our technical support here at Agilent.They provided the below.

the PN is actually the same as the interface for the 7000C:

G3870-60301 Welded interface EI

This is the EI only NO jetclean

For EI with Jetclean or EI/CI the PN is G7077-67401

Regards

James

There are two transferlines sold currently, both with the captured tip seal. These part numbers are for the assemblies with the heater/sensor, less insulation and cover.

EI only: G7077-67300 and EI/CI/JetClean G7077-67400.

These are used now for all 597Xx, 7000x, 7010x, and 7250x GCMS systems....all Agilent GCMS systems except for the 7200x GC QTOFs with the Removable Ion Source.

and the necessary tip seals can be seen here:  (+) Agilent GCMS Transferline Tip Seals - Files - GC/MS - Agilent Community