I made the mistake of doing a standard tune multiple times instead of an auto-tune and I know this lowers the sensitivity according to the hardware manual. Could this be the source? If so, how can I fix it?
Find maintenance, best practice, and troubleshooting articles.
I made the mistake of doing a standard tune multiple times instead of an auto-tune and I know this lowers the sensitivity according to the hardware manual. Could this be the source? If so, how can I fix it?
Hi
Change helium cylinder..sometime helium impurity give such error.
Check all filters connected with helium line,if very old then change those filters..
After that if problem continue then you can perform bakeout of MS then next day do autotune to see result...
After that if problem continue then you can perform bakeout of MS then next day do autotune to see result...
Did you check filaments, that's are okay or not..
And last if still problem persist then better to call your local agilent support to check system...